OUT SYSTEM Technisches Handbuch Seite 23

OUTDOOR
UNCONVENTIONAL
TEXTURE
Sample:
50mm x 100mm
Initial tension 10N
Test speed 50mm/min.
Lab tests carried out with
a torque meters on several
cross-sectioned coating
samples.
OUT – Outdoor Unconventional Texture – is the coating system with an exceptional design
suitable for exterior wall surfaces and damp indoor environments.
A great alternative to conventional materials, OUT SYSTEM allows a smooth coverage to be
achieved on any surface: concrete, thermocap, cement, plasterboard, wood, plaster, sheet
metal, glass, plastic, PVC, tiles, slightly uneven surfaces or surfaces with small cracks.
OUT SYSTEM features both decorative and major structural features which are able to
strengthen the wall surface it is applied to; it does not crack, tear or cause abrasions.
Its reduced electrostatic charge, its waterproof and washability qualities avoid the build-
up of dusts and pollutants.
WALL COATINGS COMPARISON TABLE
RESISTANCE TO WALL SETTLEMENT CRACKS
Paper Vinyl
ultimate strength ultimate strength
90.5N / 5cm 308.5N / 5cm
elongation elongation
0.14% 2.94%
TNT FG Fabric
ultimate strength ultimate strength
232.2N / 5cm 641.9
elongation elongation
3.05% 2.55%
ultimate strength
704.6N / 5cm
elongation
1.33%