Connecting The System - Pioneer AVIC-F220 Installationsanleitung

Connecting the system

Connecting the system
We recommend connecting the supplied external aerial. Connect the aerial plug of your vehicle to the AV receiver di-
rectly (Fig. 1).
If you do not use the supplied external aerial in order to split radio signal between this product and the built-in tuner of
the AV receiver (Fig. 2), the radio sensitivity of the AV receiver may decrease.
Base unit
Expansion port
1 m
30 cm
Not used.
RDS-TMC tuner
(supplied)
(Fig. 1)
(Fig. 2)
Note
The terminal form of the 26-pin cable may differ
depending on the terminal type of the AV receiver.
For details of connection, refer to the installation
manual supplied with the AV receiver.
Yellow
26-pin cable (supplied)
2 m
30 cm
Aerial jack
For more details about the wiring, refer to Wiring the external aerial on page 17.
Aerial jack
Vehicle aerial
RDS-TMC tuner
Green
3.55 m
Vehicle aerial
Aerial jack of AV receiver
AV receiver
External aerial (supplied)
Aerial plug
Aerial jack of AV receiver
AV receiver
GPS aerial
Engb
Section
03
7