GOEBEL GO-BR1 Bedienungsanleitung Seite 20

3 | English 2 | Deutsch
Safety precautions
Use of the battery
• Do not charge damaged, contaminated or wet batteries.
• Batteries must not be thrown into water or fire at any time, and used batteries must
not be disposed of at will.
• Do not charge when the ambient temperature is below 0°C or above 45°C.
Use of the charger
• The original battery and the manufacturer's charger must be used for charging.
• The battery must not be charged with a damaged, dirty or damp charger.
• Do not place metal objects in the charging area as a short circuit may occur.
• This charger must not be used by persons with disabilities, mental disabilities or
persons without training or knowledge unless a safety officer is on site to supervise
or instruct them in the use of the charge.
Danger
• Do not use the riveting tool in a damp environment or near flammable liquids and
gases. Risk of explosion!
• Do not point the riveting tool at yourself, others or animals.
• Do not load in a damp environment, near an open fire or in an environment with flam-
mable, highly combustible gases that can easily be detonated.
Warning
• Tools should be placed so that they do not fall down to avoid unnecessary damage
and safety accidents.
• When installing the battery, make sure to fix its position. After hearing a "click" sound,
indicate that the battery is in place.
• When servicing this riveting tool, the battery must be removed.
• Before charging, check that the charger and its power supply equipment are in good
condition.
• Use a power supply unit that matches the charger.
• Plugs, power cords and chargers should be checked regularly. If a problem is found, it
should be repaired by maintenance personnel.
• Maintenance personnel must have professional skills; only qualified professionals can
carry out repairs. If in doubt, please return the unit to the authorised dealer or manufac-
turer for repair.
• Original spare parts must be used during maintenance.
www.goebel-group.com