Installation Procedures; Cleaning & Maintenance - Wellis Umbra Aufbauanleitung

Installation Procedures

Make sure the installation holes to be in right size,
Connect the main body & water supply pipe With water inlet pipe
Cold
Water
connection hose
heater
Hot
connection hose
Usage
How to operate the handle
1) Raise the handle up for opening water; push it
down for close;
2) Turn the handle to the left to increase hot water
flow for higher water temperature,and lower water
temperature by operating reversely.
Open
Close
Cleaning & Maintenance
To keep the product clean & shining,follow the as below;
1. Flush with clean water & dry with soft cloth only;
2. If any dirt, clean with soft liquid or transparent glass detergent;
3. Do not use any scrubbing detergent, polisher, sane-cloth, paper tissue;
4. Do not use acid detergent, indissovable grain-like detergent or soap;
5. Disassemble the aerator with a coin and clean it when necessary.
Sealed tape
Left Right
Hot water Cold water
The diverter instruction:
1. Pull the diverter up and then the showerhead come
out meanwhile the aerator turn off.
2. Contrarily fixing the diverter down,the aerator come
out and then showerhead turn off.