Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
|
EN
|
Installation Procedures
Make sure the installation holes to be in right size! Connect the main body & water supply pipe With
water inlet pipe!
Water
heater
Usage
How to operate the handle
– Raise the handle up for opening water; push
it down for close!
– Turn the handle to the left to increase hot
water flow for higher water temperature,
and lower water temperature by operating
reversely!
Close – Open
Cleaning & Maintenance
To keep the product clean & shining, follow the as below:
1. Flush with clean water & dry with soft cloth only!
2. If any dirt, clean with soft liquid or transparent glass detergent!
3. Do not use any scrubbing detergent, polisher, sane-cloth, paper tissue or scraper!
4. Do not use acid detergent, indissovable grain-like detergent or soap!
5. Disassemble the aerator with a coin and clean it when necessary!
The operation of our shower panels and faucets is designed for the ideal water pressure
between 3.5-4.5 bar.
Cold
connection
hose
Hot
connection
hose
Left
Right
hot
cold
water
water
Sealed
tape
The diverter instruction:
– Pull the diverter up and then the
showerhead come out Meanwhile the
aerator turn off.
– Contrarily fixing the diverter down, the
aerator come out and then showerhead
turn off.
Diverter
|
3
|
Diverter
Werbung
Inhaltsverzeichnis
