Service Data; Installation - Zanussi ZCE54001WA Benutzerinformation

Problem
Steam and condensation settle
on the food and in the cavity of
the oven.
The oven does not heat up.
It takes too long to cook the
dishes or they cook too quick-
ly.

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

WARNING!
Refer to Safety chapters.
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
For minimal distances for fitting check the table.
14
All manuals and user guides at all-guides.com
Possible cause
You left the dish in the oven for
too long.
The necessary settings are not
set.
The temperature is too low or
too high.
We recommend that you write the data here:
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
Make sure that the settings are
correct.
Adjust the temperature if nec-
essary. Follow the advice in
the user manual.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
A
Remedy
B
C
www.zanussi.com