Securepoint UTM Security Systems Installationsanleitung Seite 43

If the internal zone is not on the internal network, a manager must be set. All
already registered managers in a current version can be read out via:
manager get
To add a manager:
manager new hostlist xxx.xxx.xxx.xxx/xx
Instead of an IP address or a network, as of v11.7, a DynDNS name can also
be entered, which is regularly updated by the Securepoint appliance.
Our Securepoint Wiki:
In our Securepoint Wiki you will find information and how-tos about our
products. An overview of all CLI commands can be found there to.
http://wiki.securepoint.de
The Support Forum:
In our support forum, you can ask questions or participate actively in
discussions with us and other resellers.
https://support.securepoint.de
Support and Help
If you have a problem, please contact Securepoint support free of charge. In
the Reseller Portal, you can always open a support ticket and check the status
of your tickets.
https://my.securepoint.de
Or use our callback service:
http://www.securepoint.de/callback
Or send an email with the problem:
support@securepoint.de
- 42 -