Installation Assistant - Securepoint UTM Security Systems Installationsanleitung

Installation Assistant:

License Terms:
The license must be accepted before the installation wizard can be started. It
can also be viewed on our website.
https://www.securepoint.de/licenseagreement
Step 1:
Specify what the name of the Securepoint appliance, who the global contact,
and what the email address of that person is. Please check the system time
and adjust if necessary. If the time deviates too strongly, it can lead to mal-
functions.
Step 2:
Enter the desired IP address of LAN 2 (internal network) and the netmask
(network size, eg network mask in bitcount format: /24, 255.255.255.0) of the
gateway. The slider can be used to enable the DHCP service for the internal
network.
- 31 -