Setting Brightness, Contrast And Color Saturation; Configurable Functions; Short Messages; Open The Floor Door - Carus CAI2300-015 Serie Bedienungsanleitung

Setting brightness, contrast and
color saturation
Parameters Setting
Language
Keypad Tone
Ring Vol
Brightness
Contrast
Color
Back
1. Shortly press the menu button
Menu is displayed.
2. Select the menu System Setting by pressing
the image button
. Confirm the selection by pressing the
speech button .
3. Select the menu User Setting by pressing the
image button or the call-OFF button
. Confirm the selection by pressing the
speech button . Confirm the selected menu
Config Parameter by pressing the speech
button again.
4. Select, for example, the parameter Brightness
by pressing the speech button
call-OFF button
to adjust the brightness. The changes
are visible immediately in the video image.
5. The menu is faded-off automatically after 10
seconds, when no button is pressed. Press
the menu button
the menu.
English
No
Alter OK
. The Task
or the call-OFF button
. Press the
or the image button
several times to exit
CONFIGURABLE
FUNCTIONS
The following functions can be configured at
your video indoor station. For these configura-
tions, please contact your qualified electrican.
The function Switching lights, home control, internal call, call
diversion, door release automatic and short messages can be
used only alternatively.

Short messages

Your video indoor station is able to receive and
display short messages. If the station has recei-
ved is a new message, the green LED
Press the menu button
SMS by pressing the image button
call-OFF button . Confirm the selection by
pressing the speech button

Open the floor door

If the floor push button at the floor door is pres-
sed, the floor door (instead of the front door) can
be opened by pressing the door release button
within 30 seconds.

Call indoor station (internal call)

To call another indoor station, press the menu
button . Select the menu Internal Call by
pressing the image button
button . Confirm the selection by pressing
the speech button . Press the speech button
to establish a voice connection. An acknowledge-
ment tone sounds when the call has reached its
call destination.
Max. 10 call destinations (internal calls)
can be stored in the indoor station.

Controlling and lights

If there is no voice connection established, you
can switch the lights by pressing the speech but-
ton . Press the menu button
control function. Select the menu Controlling and
Lights by pressing the image button
call-OFF button . Confirm the selection by
pressing the speech button
function or light switch function by pressing the
image button or the call-OFF button
Confirm the selection with the speech button
blinks.
. Select the menu
or the
.
or the call-OFF
to trigger a
or the
. Select a control
.
.
15
EN