EN
SETTING OSD MENU
Setting the menu language and ring tone volume
Setting the menu language and ring tone volume can be executed in the OSD menu in standby mode
(speaking and video off).
Task Menu
1 Bulletin Board
2 Internal Call
3 Control and Light
4 Automatic Function
5 System Setting
Exit
System Setting
1 Installer Setting
2 User Setting
Back
User Setting
1 Parameters Setting
Back
Parameters Setting
Language
Keypad Tone
Ring Vol
Brightness
Contrast
Color
Back
14
Service Fon +49 4194 9881-188 | Fax +49 4194 9881-188 | E-Mail hotline@tcsag.de
Up
Down
OK
Up
Down
OK
Up
Down
OK
English
No
Alter
OK
1. Shortly press the menu button
Menu is displayed.
2. Select the menu System Setting by pressing
the image button
. Confirm the selection by pressing the
speech button
.
3. Select the menu User Setting by pressing the
image button
. Confirm the selection by pressing the
speech button
. Confirm the selected menu
Config Parameter by pressing the speech
button
again.
4. Select, for example, the parameter Ring Tone
Vol. by pressing the speech button
the call-OFF button
to adjust the ring tone volume. The ring
tone sounds in the selected volume.
5. The menu is faded-off automatically after 10
seconds, when no button is pressed. Press
the menu button
the menu.
. The Task
or the call-OFF button
or the call-OFF button
. Press
or the image button
several times to exit