Speedcontroller - Carson X10ET-XL CLIMB WARRIOR Betriebsanleitung

Description Speedcontroller
We recommend for the operation of the built-in model speed con-
troller the LiFe drive battery which is included in delivery. But you can
use also 7.4V LiPo and 7.2V NiMH drive battery. You must change the
located Jumper on the controller.
One is for LiFe/LiPo- and other is for NiMH battery used. This is absolu-
tely necessary, since the drive battery is otherwise damaged:
TYPE
BATT
ESC
Lipo
NiMH
CARSON X10ET-XL CLIMB WARRIOR 500404056
BATT jumper to left:
BATT jumper to right:
About the TYPE jumper you can be select whether in normal mode
(ESC) or in the crawl mode (active brake) is to be moved.
NiMH
LiPo battery
NiMH battery
Lipo
17