Description Speedcontroller; Charge Battery Pack; Inserting The Drive Battery - Carson MC-10 Mountain Warrior Betriebsanleitung

DESCRIPTION SPEEDCONTROLLER

We recommend for the operation of the built-in model speed
controller the LiFe drive battery which is included in delivery. But
you can use also 7.4V LiPo and 7.2V NiMH drive battery. You must
change the located Jumper on the controller.
One is for LiFe/LiPo- and other is for NiMH battery used. This is
absolutely necessary, since the drive battery is otherwise damaged:
BATT jumper to left:
BATT jumper to right:
About the TYPE jumper you can be select whether in normal mode
(ESC) or in the crawl mode (active brake) is to be moved.

CHARGE BATTERY PACK

INSERTING THE DRIVE BATTERY

1 Remove the bodywork.
2 Insert the battery into the designated compartment.
3 Secure it with the available hook-and-loop strap.
Advice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before
being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for any
damage to their cord, plug, enclosure and other parts.
GB // 16
LiPo battery
NiMH battery
LiPo 7.4 V 1700 mAh
2h LED green LED red