Westfalia 92 85 76 Originalanleitung Seite 12

 Please keep in mind that the spray gun causes strong vibrations
which can lead to repetitive strain injuries in some cases. Keep
sufficient rests.
 Keep your working area tidy. Only take as much paint and thinner
to your working area as required for completing the job. Do not
keep paint and thinners in open containers; store them in a safe
place which is not easily accessible to others.
 During painting no ignition source (e.g. open flames, lid ciga-
rettes, lamps not protected against explosion etc.) may be pre-
sent, because during painting explosive gases may be formed.
 Solvents and coating materials can be easily inflammable or
combustible if they are spilled or sprayed. Always follow the
warnings and safety information of the paint or solvent manufac-
turers.
 With daily use, clean the air spray gun preferably with a washing
device for spray equipment. Do not let the spray gun for a long
time in the washing machine.
 Do not use solvents or cleaning fluids based on halogenated
hydrocarbons, such as 1.1.1-Trichlorethane and Methylenechlo-
ride, chemical reactions can occur on the gun as well as on gal-
vanized parts (1.1.1-Trichlorethane with small quantities of water
reacts to hydrochloric acid). Thus the parts may oxidate; in the
worst case the reaction cause an explosion.
 When working with potentially explosive material, keep in mind
that static charges may result from circumstances such as clean-
ing of non-conductive parts with cloth, the flow of liquids or air
through hoses, when spray painting, etc.
 Do not continue using a damaged air tool. Do not open the unit
and do not try to repair it yourself. In case of questions or prob-
lems contact a professional or our customer service.
 Have a fully functioning fire extinguisher available at all times.
Safety Notes
8