Beef Tenderloin; Disposal; Packaging; Trouble-Shooting - Silvercrest SEMP 1500 A1 Bedienungsanleitung

mulating excessive batter in the centre
of the heating surface.
7. Flip the pancake when its upper side no
longer looks fluid. This should take ap-
prox. 4 minutes.
8. Then bake the other side of the pancake
for approx. 4 minutes. Ideally, both
sides of the pancake are now golden
brown.

9.2 Beef tenderloin

1. Set the pan to level 5.
2. Put approx. 2 tbs concentrated butter
into the pan.
3. Let the pan preheat with the lid closed
for at least 5 minutes.
4. Put some spices, as desired, into the
pan - e.g. some steak seasoning.
5. Place the fillet steak preferably approx.
3 - 5 cm from the edge of the pan.
NOTE: the preparation is done without lid.
6. Fry the steak according to the desired
degree of doneness. Turn the steak regu-
larly.
7. Season the finished steak with salt and
pepper, and let it rest for another
approx. 5 minutes before serving.

10. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates that
the product requires separate refuse collec-
tion in the European Union. This applies to
the product and all accessories marked with
this symbol. Products identified with this sym-
bol may not be discarded with normal
household waste, but must be taken to a col-
lection point for recycling electric and elec-
tronic appliances.
28
GB
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

11. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
• Is the mains plug 4 in-
No function
• Check the connection
• Is the thermostat con-
Possible causes /
Action
connected to the pow-
er supply?
serted?
of the plug with ther-
mostat 5 in the sock-
et 6.
trol 9 set to 0?