Operation; Setting Up; Connecting; Switching On And Controlling The Temperature - Silvercrest SEMP 1500 A1 Bedienungsanleitung

6. Operation

6.1 Setting up

FIRE HAZARD!
Before switching on the device, place it
on a heat-resistant, flat and stable sur-
face.
The device must not be operated close
to flammable liquids or materials, or in
a potentially explosive environment.
Keep at a distance of at least 30 cm
from walls. In order to prevent overheat-
ing of the device or a potential fire, the
device must not be covered.
Do not use the electric multi-pan under
wall units or near curtains, paper or
similar flammable objects.
The device must never be placed direct-
ly under a wall socket, as the arising
heat may lead to damage to the electric
system.
WARNING! Risk of material dam-
age!
The device is not designed for operation
outdoors.
If you want to fry at the table, please
note that splashes of fat can damage
the table, the tablecloth and clothing.
• Place the multi-pan 7 in a suitable loca-
tion.

6.2 Connecting

WARNING! Risk of material dam-
age!
Make sure that the device is switched
off before you connect it to a wall sock-
et (thermostat control 9 is set to 0).
1. Figure D: insert the plug with thermo-
stat 5 into the socket 6 as shown.
2. Insert the mains plug 4 into an earthed
wall socket corresponding to the specifi-
cations of the rating plate.
6.3 Switching on and
controlling the
temperature
FIRE HAZARD!
If fat or oil catches fire, it must never be
extinguished with water, because this
would lead to a fat explosion. Stifle the
fire by placing the lid on the pan or with
a fire blanket or woollen blanket.
Always keep an eye on the electric mul-
ti-pan during operation. You will thus be
able to detect possible problems early
on due to unusual smells or noises.
DANGER! Risk of injury
through burning!
Avoid any contact with the hot oil or
any splashes.
The lid and the multi-pan become very
hot during operation. During opera-
tion, only touch the handles and control
elements of the device.
During the cooking process, hot steam
can escape from the opening in the
lid 3. Be careful not to put your hands
into the steam.
Hot steam may escape when the lid is
removed. Please use potholders. Keep
your face and hands well away.
1. To switch the device on, turn the thermo-
stat control 9 to the desired temperature
setting. From level 1, the device heats up
and the temperature control light 10 is
lit.
2. The temperature control light 10 goes off
when the multi-pan 7 has reached the se-
lected temperature. Now you can start to
prepare the food.
25
GB