Making The Connection Between Remote Control And Cooker Hood; Activating Bluetooth; Activating The Remote Control - Pelgrim ISWA0960 Serie Bedienungsanleitung

OPERATION WITH THE REMOTE CONTROL

Making the connection between remote control and cooker hood

Making a connection
1. Turn off the hood and the lighting.
2. Press and hold the plus button on the remote control for five seconds.
▷ The indicator lights on the on/off button and speed button 2 of the cooker hood will
flash simultaneously for a maximum of two minutes.
3. The connection is successful when the indicator lights on the on/off button and speed
button 2 of the cooker hood are illuminated continuously for two seconds.
If the indicator lights on the on/off button and speed button 2 of the cooker hood are no
longer illuminated within two minutes, the connection was not successful. Repeat the
procedure. If necessary, clear the hood's memory (see "Disconnecting").
Disconnecting
1. Turn off the hood and the lighting.
2. Press and hold the intensive button and lighting button simultaneously on the remote control
for five seconds.
The indicator lights on the on/off button and speed button 2 of the cooker hood will
▷
flash five times simultaneously.
The remote control is no longer connected.
▷

Activating bluetooth

1. Press and hold the lighting button and bluetooth button on the remote control
simultaneously for five seconds.
▷ The green LED signal flashes four times.
▷ Bluetooth is activated.

Activating the remote control

1. Press and hold the on/off button and lighting button on the remote control simultaneously
for five seconds.
The green LED signal flashes twice.
▷
The remote control is activated.
▷
EN 9