Hortensus 8FT Benutzerhandbuch Seite 19

TESTING THE TRAMPOLINE
After assembling the trampoline, it is important that you perform the following safety checks:
Trampoline safety checks:
1. Check with a screwdriver, to ensure that all screws are tightened.
2. Check under the trampoline to make sure that all springs of the frame are hooked up to the
jumping mat.
3. Move the trampoline around and check the stability of the frame. The floor must be level.
4. Using your two hands put your body weight on one section of the trampoline and release
to check that the floor is even.
5. Make sure that the springs and the frame are completely covered by cover mats and the
cover mat is secured with belts securely.
Enclosure net safety checks:
1. Hold onto pole net jacked and check that all the enclosure poles are sturdy by shaking it.
2. Check the enclosure net and jacket for any tearing in the stitching or material.
3. Check the enclosure net zipper and entrance hooks function properly.
4. Check suspended below that trampoline in the triangular-eyelets.
5. Check whether all hooks are in the triangular-eyelets of the trampoline.
Once all the checks are performed and the trampolines has passed all the initial test (above),
then your trampoline have one person test the trampoline by jumping on the center continuously
for 5 minutes. If the trampoline feels sturdy then your trampoline passes the test. Congratulation,
you have completed the trampoline assembly! Remember to abide by all the safety rules. Have
fun, play safe.