Inserting / Replacing Batteries; Attaching The Neck Strap - Silvercrest SPO 55 Gebrauchsanleitung Und Sicherheitshinweise

Inserting / Replacing
batteries
Slide the battery cover
Insert the two included batteries (with the
correct polarity) in the pulse oximeter (Fig. D).
Please note the marking inside the battery
compartment.
Close the battery compartment
Note: Measurement data is still retained
after the battery has been replaced.
72 GB/IE
open (Fig. C).
4
(Fig. E).
4

Attaching the neck strap

To transport the pulse oximeter more easily,
you can attach a neck strap to the device.
1. Push the narrow end of the neck strap
through the bracket (Fig. I).
2. Feed the other end of the neck strap
through the loop of the narrow end, and
pull tight (Fig. J).