Vaillant VRT-PZA 9148 Bedienungsanleitung Seite 31

A Operating instructions – 5 Programming heating periods
5.7 Simultaneously programming
or copying resp. heating periods
for several days
Heating periods can be entered simultaneously for
several days of the week, or existing heating periods
for one day can be copied to one or several days.
Press Pro programming key (10), the room
thermostat changes to the programming mode
(fig. 5.19).
Press change-over key
change-over point flashes (fig. 5.20).
Press day key 1..7 (5) until the day with the
heating periods to be copied is displayed.
Press block key b (9) for fixing this day as source
day. cP is displayed (fig. 5.20).
(7), the adjustable
Press day key 1..7 (5) to select further days for
which hoint heating periods are copied b pressing the
block key b (9). The display shows fixed numbers for
the days of the block with joint flashes (fig 5.21).
If one day is to be removed:
Press day key 1..7 (5) until the number of the
corresponding dav flashes (5.22).
Press block key b (9); the b in the display is
deleted (fig. 5.23).
Press Pro programming key (10), the
programme is adopted, the display shows the normal
reading (fig. 5.5).
(Fig. 1, 5)
GB
31