Cleaning And Storage; Disposal - Silvercrest SLM 2 A2 Bedienungsanleitung Und Sicherheitshinweise

Cleaning and storage

ATTENTION
► Always disconnect the device from the 12/24 V
connection when cleaning and when it is not
being used.
► Temperatures inside the vehicle can reach
extreme levels in summer and winter. Therefore,
to avoid damage to the device, do not store it in
the vehicle.
► Do not use caustic, abrasive or solvent-based
cleaning materials. These can damage the
surfaces of the device.
♦ When necessary clean the device with a soft cloth.
♦ Store the device somewhere clean, dry, free of
dust and out of direct sunlight.

Disposal

The adjacent symbol of a crossed-out
wheelie bin means that this device is
subject to Directive 2012/19/EU. This
directive states that this device may not be
disposed of in normal household waste at the end of
its useful life, but must be brought to a specially set-up
collection point, recycling depot or disposal company.
This disposal is free of charge for the user .
Protect the environment and dispose of this
device properly .
To find out about options for disposal of
the used product, please contact your
municipal or city administration.
The product is recyclable, subject to
extended producer responsibility and is
collected separately.
The packaging materials have been
selected for their environmental friendliness
and ease of disposal and are therefore
recyclable. Dispose of packaging materials that are
no longer needed in accordance with applicable
local regulations.
Dispose of the packaging in an environ-
mentally friendly manner. Note the
labelling on the packaging and separate
the packaging material components for
disposal if necessary. The packaging material is
labelled with abbreviations (a) and numbers (b) with
the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites.
GB / IE
- 5 -