Xoro HRS 8600 CI Bedienungsanleitung Seite 88

Channel Search
3. Using multiple satellites via DiSEqC 1.0
The distribution of analogue and digital signals from the Astra and Eutelsat is using DiSEqC™ (Digital
Satellite Equipment Control) is possible if only one cable to be laid to the satellite receiver. This new
tax system complements the conventional switching criteria, 14/18 Volt or 22 kHz, and removes the
restrictions on maximum 4 switching states. In the simplest version of DiSEqC™ is used between two
universal LNB switch to. The 22 kHz switching circuit is used for the lower and upper frequency band
LNB.
DiSEqC 1.0 controls up to four LNB with the command position A / B and Option A / B.
How to do:
1. Select the satellite the first satellite, and
confirm the selection with the OK button.
2. Press
configuration of the satellite.
3. Navigate with the arrow key DOWN to the
"DiSEqC" setting. Define for this satellite
with the OK button, select "DiSEqC 1.0".
Press the OK button.
4. Another option appears. Navigate with
the arrow key down to the setting DiSEqC
1.0 and select the setting "A". Confirm
this by pressing the OK button.
5. Press the BACK button to return to the
satellite list.
6. Select the satellite the first satellite, and
confirm the selection with the OK button.
7. Press
configuration of the satellite.
8. Navigate with the arrow key down to the
"DiSEqC" setting. Define for this satellite
with the OK button, select DiSEqC 1.0.
Press the OK button.
9. Navigate with the arrow key DOWN to the
setting DiSEqC 1.0 and select the setting
as you confirm this with the OK button.
10. Press the BACK button.
11. And so on.
Press BLUE to start searching.
You have the option of up to four satellites. Press the BLUE button to start scanning. It now appears
another query where you can specify additional search parameters (see previous pages). The
satellites are searched in order.
All received TV and radio stations are displayed in the two lists. After the scan, the TV and radio
stations in the two lists are stored and the unit goes into the live image of the first TV station.
24
the INFO button
the INFO button
First steps
for the
for that
HRS 8600 CI
On