Xoro HRS 8600 CI Bedienungsanleitung Seite 87

Channel Search
2. Direct connection of satellite dish and receiver by using Tone burst
Tone burst is a additional feature of receivers. This signal does not include digital commands, but it
can nevertheless be evaluated by most of the switches for position switching.
How to do:
1. Select the satellite the first satellite and
confirm them with the OK button.
2. Press the
configuration of the satellite.
3. Choose from a satellite and go with the
DOWN arrow key to the "DiSEqC" setting.
Define for this satellite with the OK button
to select "Tone Burst A". Press the OK
button.
4. Press the BACK button to return to the
satellite list.
5. Select the satellite the first satellite, and
confirm the selection with the OK button.
6. Press the
configuration of the satellite.
7. Navigate with the arrow key down to the
"DiSEqC" setting. Define for this satellite
with the OK button to select "Tone Burst
B". Press the OK button.
8. Press the BACK button to return to the
satellite list.
Press BLUE to start searching.
A new menu appears asking for more parameters. After setting all parameters press OK for starting
the search. The received programs are shown in the according lists and are saved when the search is
finished.
INFO button for
INFO button for
First steps
the
that
HRS 8600 CI
On
23