Fence Installation - Voss.pet fenci M03 Bedienungsanleitung

INSTRUCTION MANUAL VOSS.PET FENCI
7.4

FENCE INSTALLATION

In addition to correct grounding, you also require suitable conductor material and
insulators to construct the ideal electric fence. Conducting material has low electrical
resistance, which allows the current to flow better. Insulators have a high electrical
resistance and are used to hold or guide the conductor material.
Ask us for advice to find out which products are suitable for your purposes.
Observe the following points to ensure better conductivity in your fencing system:
ऀ Always keep your electric fence system free from vegetation. Do not run your fence
through hedges and prevent any branches or bushes from completing the circuit.
Vegetation will reduce the voltage of your fence and the shock strength of the
electrical pulse may no longer be powerful enough.
ऀ Ensure that the conducting material in your fence does not touch the ground, e.g.
by sagging.
ऀ Only use fence posts with insulators so as to insulate the conducting material
from the post and the ground. This will prevent any loss of voltage and ensure the
desired current flows through the conducting material of the fence.
Info
It is not necessary to created a closed fence system. The fence can end at any
point.
We recommend the following conductor spacing:
Large dogs
Cats
41205 | 12 | 2020 | V3
Small dogs
85 cm
50 cm
25 cm
Rabbits
50 cm
25 cm
10 cm
DE
EN
EN
FR
IT
NL
SV
ES
PL
50 cm
25 cm
10 cm
45 cm
30 cm
15 cm
33