70/90
Bosch Rexroth AG
Contents
A_15
Reserved
A_16
Not used
A_17
Not used
A_18
Not used
6.3
Other inputs/outputs
Tab.8: Other inputs
inputs:
Analog pressure input
Analog force input
Secondary current
Secondary voltage
Transformer temperature
Tab.9: Other outputs
outputs:
Analog pressure output
Operate force sensor
7
Features
Schedule standard 1000 Hz (schedule parameters in milliseconds)
I/O Module : E/A_DISKR2ED
(Details refer to Tab1. Required and supplementary documentation,
Rexroth PSI6xxx Weld Timer with Medium-Frequency Inverter Instructions).
7.1
Special features
The timer has the following features.
Timer has been prepared for networking with an ProfiNet module
The „Stop circuit open / no 24 V" fault is automatically reset.
The DC link voltage is always checked, the fault message is automatically
reset.
With Initial dressing function
7.1.1
Schedule
Program start is subdivided in two parts:
New spot selection
PSI 6xCx.762xx | R911173895