Other Inputs/Outputs - Bosch Rexroth PRC 7 00 L/W 1300 Serie Typspezifische Anleitung

48/58 Bosch Rexroth AG
Plug Pin
DI_09
Plug Pin
XGD1 DO_00
DO_01
XGD2 DO_02
DO_03
Plug / Pin
XDS1 / 7
XGM1 / 1, 2, 3
XGM1 / 4, 5, 6
XGM1 / 7, 8, 9
Plug / Pin
XDS1 / 13
XDS1 / 14
Inputs Description
This check can be activated/deactivated via the parameter
"GU_FlowSensor1Active" in the gun and takes place before
all other checks at the start of welding.
Flow Sensor S-Arm When using a pneumatic gun and an MGDM, this input is
used to detect whether flow sensor2 ensures sufficient
coolant flow.
This check can be activated/deactivated via the parameter
"GU_FlowSensor2Active" in the gun and takes place before
all other checks at the start of welding.
MGDM outputs
Tab. 9:
Outputs Description
Close Gun When using a pneumatic gun and an MGDM, the signal for
closing the gun is output here.
Open Gun When using a pneumatic gun and an MGDM, the signal for
opening the gun is output here.
Compensation Lift When using a pneumatic gun and an MGDM, the signal for
activating the pneumatic gun compensation is given here.
This function can be activated/deactivated via the
"SP_PneumaticGunCompensationViaMgdmActive" in the
spot. When the function is activated, the output is set
simultaneously with the closing of the gun.
Compensation Back When using a pneumatic gun and an MGDM, the signal for
deactivating the pneumatic gun compensation is given
here.
This function can be activated/deactivated via the
"SP_PneumaticGunCompensationViaMgdmActive" in the
spot. If the function is activated, the output is set at the
same time as the gun is opened.
6.4

Other inputs/outputs:

Other inputs
Tab. 10:
Inputs
Main switch release +24V
Secondary current
Transformer temperature
Secondary voltage
Tab.9: Other outputs
Tab. 11:
Outputs
Shunt release
Undervoltage release
R911407348 | PRC 7x00-Lx/Wx-1300