OHAUS Defender 6000 Benutzerhandbuch Seite 8

EN-6
2.2.2 RS232 Interface Cable to i-DT61XWE
Pass the optional RS232 cable through the strain relief and attach it to the RS232 connector on the mainboard.
Tighten the strain relief to maintain a watertight seal. Please refer to Figure 2-4 for the postion of the
serial port connector RXD TXD and GND.
Note: Please refer to Opeing the Housing section for how to open the case of the terminal.
RS232
connector
Figure 2-3 RS232 connector on the
Figure 2-2
Strain Relief for Option
mainboard
Defender 6000 Indicators
Discrete Input0
Figure 2-4
RS232 connector