Suntec Wellness KLIMATRONIC AIR-BLOCK KLIMA-SAIL 450 XXL Montageanleitung Seite 5

› ASSEMBLY
GB
Glue the Velcro strip, starting at the stop of the window, onto the window
B A
2 frame (2) and the window sash (3) each up to the corner. Now cut the
Velcro strip with scissors. Next you stick the Velcro strip from the upper to
3
the lower corner and cut it there again. Now stick it from the corner again
until the window stops.
Attention: Do not stick the Velcro tape on the window/door seal so that the window/door can be
closed at any time!
In the next step, press the sail with the previously marked center (1) onto
B A
the center of the window frame, which was also previously marked. Make
sure that you press the wide side A onto the window frame. Now press
the sail up and then down on the Velcro strip. Then attach the sail to the
window sash with the narrow side B.
1
In the last step open the window and the zipper. Push the hose through.
Close the zipper as tightly as possible around the hose. The Klima-Sail
is now ready for use. To close the window if necessary, simply open the
zipper, take the hose out of the opening and close the zipper again. The
window can now be closed as usual. To open the window completely,
release the sail from the Velcro on the window sash. You can then reattach
the sail to the Velcro strip.
› REINIGUNG
1. Clean the product in the washing machine at 40 °C
2. After washing, return the product to its original shape and size.
3. Hang it on a drying rack for drying.
5