Configuration Menu (Menu) (Operation Without The Max! Cube) - Max EQ-3 Bedienungsanleitung

• In manual operation (Manu) press the (-) button until
"OFF" is shown on the display.
• To finish, exit manual operation (Manu) or press the (+)
button until the desired temperature is set.
(Operation without the MAX! Cube)
If you operate your MAX! system with a MAX!
Cube, you can conveniently set the functions
described in the following chapters in the MAX!
software in each room.
The following steps explain how these functions
are set when operating without MAX! Cube. In
combination with the MAX! Cube these functions
are deactivated at the MAX! wall thermostat.
Settings can be changed in the Configuration menu when
using MAX! without Cube. The menu can be accessed by
pressing the Mode button for more than 3 seconds.
The menu items are selected with the (+) and (-) button and
confirmed with the OK button. A subsequent pressing of the
Mode button reverts to the previous level. The menu closes
automatically after 60 seconds of inactivity.
dAt:
UnL:
Teach-out wireless components (UnL) (sec.
11.)
Pro: Set the week programme (sec. 17.1)
t-d: Switch time and date display (sec. 17.2)
17. Configuration menu (Menu)
Change time and date (sec. 7.)
41