Teaching-Out Of Wireless Components (Unl) - Max EQ-3 Bedienungsanleitung

ture, weekly programme). The MAX! wall thermostat for-
wards all commands and settings to the devices that have
been taught in on it radially.
To teach-in your components proceed as follows:
• First switch the teach-in partner (e.g. the MAX! Radiator
Thermostat) according to teach-in mode.
• Now enable the teach-in mode on the MAX! wall ther-
mostat by pressing and holding down the OK button.
• The antenna symboll ( ) is displayed, along with the
teach-in time remaining in seconds. The teach-in time
is 30 seconds.
• After teaching-in was successfull, the MAX! wall thermo-
stat switches into the standard operating mode.

11. Teaching-out of wireless components (UnL)

During operation with the MAX! Cube, the MAX! wall ther-
mostat end the other devices are taught out via the local
MAX! software in the respective room.
During operation without the MAX! Cube you use the „UnL"
function in the menu in order to unteach devices that have
been taught in at the MAX! wall thermostat (e.g. MAX! ra-
diator thermostat). All radio components are untaught si-
multaneously.
To unteach, proceed as follows:
• Select the "UnL" menu item with the (+) and (-) buttons.
• Confirm the setting with the OK button.
• "ACC" will show on the display.
• Confirm with the OK button.
38