9. Installation in multiple combinations
You can mount the MAX! wall thermostat with the attach-
ment frame provided or use it with frames of other manu-
facturers as well as integrate the electronic unit into a multi-
gang frame. In both cases, mounting with adhesive strips
and screws is possible. For mounting with multiple com-
binations, make sure that the mounting plate of the MAX!
wall thermostat is seamlessly aligned to the already fixed
mounting plate/retaining ring.
The MAX! wall thermostat is designed to fit into frames
supplied by the following manufacturers:
Hersteller
Berker
ELSO
GIRA
merten
JUNG
10. Teaching-in of MAX! components
In order to use the MAX! wall thermostat in your installation,
you must teach it in to the MAX! system. You can use the
MAX! wall thermostat both in conjunction with the MAX!
Cube or without using the MAX! Cube. The two possib-
le usage cases are described in the following sections.
10.1 Teaching in at the MAX! System with the
MAX! Cube
The MAX! wall thermostat is taught in and configured
36
Rahmen
S.1, B.1, B.3, B.7 Glas
Joy
System 55, Standard 55, E2, E22, Event, Espirit
1-M, Atelier-M, M-Smart, M-Arc, M-Star, M-Plan
A 500, AS 500, A plus, A creation