APP INVERBOOST XP11DCsiPX32 Benutzer- Und Servicehandbuch Seite 31

10. WIFI function- 'Alsavo Pro'APP operation
1.1 Heat-Pump with WIFI function
Thank you for using our heat pump with WIFI function, you can remote control your pool heat pump from your
smart phone. The controller information could syncs to "Alsavo Pro" APP via an internet connection (WIFI or 3G/4G).
For the first time connection, your smart phone and the WIFI controller must be under the same WIFI network.
From then on, your smart phone can use the 3G/4G network to control pool heat pump remotely.
By "Alsavo Pro" APP, you can turn heat pump on or off, adjust water temperature, change mode, set time and
timer on/off, check malfunction right at your finger tips.
"Alsavo pro" APP is compatible with Android system (6.10 version or above) and IOS system (8.0 version or above).
Currently 10 languages (English, Swedish, French, Spanish, Italian, Czech, Polish, German, Russian, Chinese)
available. Several heat pumps with WiFi controller could connect to one phone's app, and several phones' app
could connect one heat pump.
2. "Alsavo Pro" APP operation
2.1 Firstly,please download "Alsavo Pro" APP from App store or Google play in your smart phone.
2.2 Open "Alsavo Pro" APP, click "+" on the upper left and select "New device". Then Click "Next" and enter the
current WIFI password to connect. Press " " 5S on the display no matter it's ON or OFF until is flashing.
Or you can press " " 5S on the display first, then enter the current WIFi password.
"Nickname and password" interface only appear one time when a new heat pump is connected successfully. You
can name and add encrypt this unit. (This interface may be missing if the wifi network is not stable. You will miss
the chance to name and encrypt it. In this case, default password "123456" is available.)
If someone's APP is in the same WIFI network as yours, his APP could automatically identify your heat pump. And
he can operate your heat pump after inputting your password.
29