APP INVERBOOST XP11DCsiPX32 Benutzer- Und Servicehandbuch Seite 17

6.2 The keys and their operations
6.2.1
button
Press to start the heat pump unit.
Press to stop the heat pump unit.
6.2.2
and
Water temperature setting:
Press or
Heating mode and Auto mode setting range:6-41℃,Cooling mode setting range: 6-35℃
and
Press
ATTENTION: The button of display will automatically be locked if no operation in 30S,
Hold and
6.2.3
button
Press to change the working mode, Turbo, Smart and silent .The default mode is smart mode.
Turbo mode:the heat pump will operate in 'Small output' , 'Medium output' and 'Full output'.
Smart mode: the heat pump will operate in 'Small output' , 'Medium output' and 'Full output'
Silent mode: the heat pump will operate in 'Medium output' and 'Small output'
6.2.4
button
Press for 5S to switching the heating mode
Remark: When defrosting, the heating symbol will flash.
Operation logic of Auto Mode:
NO Condition
When the heat pump starts
1
When the heat pump is
running
button
to set the water temperature directly.
at the same time to check water in temperature, water out temperature and set temperature.
together for 5S to unlock it.
T1=Water inlet temperature ,Tset= set temperature=28℃
Current
working Status
Startup
Heating mode
Standby
,cooling mode
Water inlet Temperature
T1≤27℃
T1≥29℃, last for 3 minutes
T1≥30℃
15
and auto mode
.
Working mode
Heating mode
Standby
It switches to cooling mode