Programs And Programming - Klarstein FAST FLAVOUR Bedienungsanleitung

PROGRAMS AND PROGRAMMING

Setting delayed start (PRESET SETTING)
Press PRESET SETTING. The preset start time is displayed and the number display
flashes. Each time the button is pressed, the time increases by 0.5 hours. From 10
hours, the time increases by 1 hour with each keystroke. The maximum time that
can be set is 24 hours
Example: Your set start time is 4 hours. When you have set the desired time, wait
until the display has blinked 8 times and the set time has been accepted. After the
start, a countdown begins. After 4 hours the unit will start automatically.
Maintaining pressure (PRESSURE SETTING)
• Press PRESSURE SETTING to set how long the pressure should be maintained.
Each time the button is pressed, the time increases by 2 minutes. The
maximum time that can be set is 98 minutes.
• Press and hold the button to adjust the time faster.
• When using this function, you cannot select any other options.
• When you have set the desired time, wait until the display has blinked 8 times
and the set time has been accepted. After the internal pressure is reached, the
time counts down every minute.
• Press the WARM/CANCEL key to cancel the function.
• Press the WARM/CANCEL key during operation to cancel the function.
• After the function has been terminated, the unit automatically switches to the
warm-up phase.
To program the unit step by step:
1. Plug in and select a program (e.g. RICE) or select a function ( PRESET SETTING
or PRESSURE SETTING) and enter a time. Wait until the display has blinked 8
times and the entered time has been accepted. The unit starts automatically
and the cooking time is shown on the display.
2. When the device has built up the correct pressure, a signal sounds. The time
during which the pressure is maintained counts down every minute.
EN
23