Danfoss HC6000 Inbetriebnahme-Instruktion Seite 5

Setting the time and day of week
1. Press the
programming mode. The LCD will fl ash
12:00.
2. Press the + or - button to adjust the time
of day, if in AM/PM mode remember to
ensure that AM/PM setting is correct.
3. Press PROG to move on to select the
current day of the week.
4. Press the + or - button repeatedly until
the correct day of the week is displayed.
Day 7 is Sunday.
5. Press PROG button repeatedly to advance to 'Programming
event times and temperatures' .
Programming event times and temperatures
The thermostat can be set by the installer to provide 2 or 4
programme events per day. The thermostat provides 5-day/2-
day programming with one set of programmes for days 1-5,
(Monday to Friday), and another set of programmes for days 6-7,
(Saturday and Sunday).
If thermostat has been set by building owner or installer for 2
events per day, only 2 events can be programmed.
PROG button to enter
GB
+ -
or
+ -
or
5