Technical Specifications - Lincoln Electric COOL ARC 50 Bedienungsanleitung

Technical Specifications

COOL ARC
Input Voltage
400/230 V ± 10%
single phase
Flow range
Open flow
The cooling power of flow 1liter per minute at temperature of
Maximum reservoir capacity
Recommended coolant
Do not use!!
Height
265 mm
Protection Rating
IP23
English
NAME
® 50
Input Amperes I max
1
1,2A
RATED OUTPUT AT 40°C
MIG
TIG
PARAMETERS RATING
25°C
1,15 kW
PARAMETERS O FTHE COOLER'S RESERVOIR
9,2 l
FREEZCOOL - W000010167
Pre-packaged welding industry coolants. These coolants may contain oil-based
substances, which attack the plastic components of the cooler. Once added to the cooler,
these substances are impossible to purge from the water lines and heat exchanger.
Automotive anti-freeze. These coolants will damage the pump and block of the heat
exchanger, affecting cooling performance.
PHYSICAL DIMENSIONS
Width
355 mm
Operating Temperature
-10°C (14°F) to +40°C (104°F)
INPUT
Frequency
50/60Hz
with torch 4,5m: 1,7  1,8 l/min
with torch 3,8m: 1,3  1,4 l/min
Maximum pressure rate
Minimum required reservoir capacity
COOLANT
Length
680 mm
1
INDEX
K14050-1
EMC Class
A
0,5 to 3,3 l/min
3,3 l/min
0,4 MPa
6 l
Weight
21 kg
Storage Temperature
-25°C (-13°F) to +55°C (131°F)
English