Maintenance; Disposal And Recycling - aerauliqa QCmev Gebrauchsanleitung

The unit runs at the speed selected by turning the knob of the SEL-3V speed selector (accessory, Fig. 7).
Speed 1 is set by turning the integral trimmer "V1" in the terminal box.
Speed 2 is set by turning the integral trimmer "V2" in the terminal box.
Speed 3 is the maximum speed achievable by the unit.
Wiring diagram: Fig. 5E - Dip switch configuration: 1000 for QCMEV 80/125 HY (Fig. 5F).
Wiring diagram: Fig. 5E - Dip switch configuration: 1001 for QCMEV 80/125 (Fig. 5F).
For humidistat version only (QCmev 80 HY - QCmev 125 HY)
Whatever is the chosen operation and the speed setting, when the humidity threshold is reached, the fan
speed is increased by 15%.
When the humidity level returns below the threshold, the fan continues to run at increased speed for a pre-set
period of time.
Humidity threshold is adjustable from 50% to 95% via trimmer HY (Fig. 5G).
To deactivate the humidistat function, turn the trimmer HY completely clockwise (position G).
NOTE: Dip switch number 4 should always be in "0" position for HY unit to enable humidistat function.

MAINTENANCE

Make sure the mains supply of the unit is disconnected before performing any maintenance.
The maintenance must be carried out by a qualified technician and in accordance with local rules and
regulations.

DISPOSAL AND RECYCLING

Information on disposal of units at the end of life.
This product complies with EU Directive 2002/96/EC.
The symbol of the crossed-out dustbin indicates that this product must be collected separately from
other waste at the end of its life. The user must, therefore, dispose of the product in question at suitable
electronic and electro-technical waste disposal collection centres, or else send the product back to
the retailer when purchasing a new, equivalent type device.
Separate collection of decommissioned equipment for recycling, treatment and environmentally
compatible disposal helps to prevent negative effects on the environment and on health and promotes
the recycling of the materials that make up the equipment.
Improper disposal of the product by the user may result in administrative sanctions as provided by law.
7