Herunterladen Inhalt Inhalt Diese Seite drucken
Vorschau ausblenden Andere Handbücher für PHÖNIX:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

07 - STARTUP

Important: When using for the first time or after replacing a gas cylinder in step 2, wait at least 60
seconds to remove air from the lines.
1. Turn the valve of the gas bottle fully open.
2. Press the gas regulator and turn it to the pilot position.
3. Press and hold the gas control knob for 30 seconds while operating the ignition several times until
the pilot flame lights up.
4. Turn the gas control knob to the High position. Hold this setting for at least 5 min.
5. Then turn the gas control knob to the desired heating power.
Switch off
1. Turn the knob to the PILOT position.
2. Press and turn the knob to the OFF position.
3. Turn the valve on the gas cylinder fully.
100 cm
Minimum safety distance
EN
68
• The heater is primarily for outdoor use only. Always
ensure that there is sufficient fresh air supply.
• Always maintain the prescribed distance from com-
bustible materials: at least 100 cm at the top and at
least 100 cm at the sides.
• Phoenix must be placed on solid, level ground.
• Never use the heater in explosive environments,
such as areas
• environment, such as in areas where gasoline or ot-
her flammable liquids or gases are stored.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

30310188

Inhaltsverzeichnis