Sonnenkönig PHÖNIX Bedienungsanleitung Seite 64

No Description
C Cover plate
D Glass tube
G Black silicone ring
K Base unit with burner
Step 7
Carefully assemble the
glass tube (D) by lifting
it and inserting it through
the center hole in the top
plate (C). Ensure that the
black silicone ring (G)
is attached to the lower
edge of the glass tube
(D) through the hole in
the lower plate cover and
onto the base unit with
burner (K). Check and en-
No Description
F Top protective cover
14 Mounting bracket
19 Screw 3/16"
Step 8
Mount the protective cover on top
(F). Hang the hooks of the protec-
tive cover on top (F) into the holes
of the brackets. Secure the top
protective cover (F) with mounting
brackets (14) and 4 pieces of 3/16"
screws (19).
EN
64
Qty
1
1
1
1
sure that the glass tube
(D) is correctly positioned
and completely covers
the center hole of the
base unit with burner (K).
WARNING! The black si-
licone ring (G) must be
in place before operating
the heater.
Qty
4
1
4
F
07
To facilitate ins-
tallation, place the
black silicone ring
on the center plate
and then install the
glass tube. Make
sure that the edge
of the glass tube is
firmly seated in the
black silicone ring.
G
08
19
14