Programmes; Programme A; Programme B - TensCare perfect mama+ Bedienungsanleitung

When pressing the BOOST button in
programme C, the power or level of
intensity during the final contractions
ramps up to give additional short-term
pain relief through a third mechanism
called "Brief intense".

7. PROGRAMMES

Programme Freque
ncy Hz
A 80
A Boost 80
B 150
B Boost 150
C 80
7.1.

PROGRAMME A

You can start using Perfect mama+ as
soon your contractions start to become
regular.
When you switch the machine on, it
automatically selects programme A.
The LCD screen will display a flashing
A. This programme is designed to
provide a pulsing
triggers the release of endorphins,
relaxing you and relieving you from
pain. This programme has 50 small
steps of intensity, so you have fine
control of the strength of stimulation.
There are two modes, A and A Boost.
Mode A (A is flashing on the screen) is
for use between contractions and mode
A Boost (A is constantly displayed) is
for use during contractions. You can
Pulse Mode
Width μs
150 Burst
150 Constant
150 Burst
150 Constant
250 Ramp
sensation that
11
switch between the two modes at any
time by pressing the BOOST button.
The Perfect mama+ will start at zero
intensity. Increase the intensity until you
feel a pulsing on-off-on-off sensation.
When the next contraction starts press
the BOOST button once and the mode
will change to mode A Boost, at the
same intensity level as it was when in
mode A. Mode A Boost feels like a
constant strong tingling. At the end of
the contraction, press the BOOST
button to return to mode A. Repeat this
each time a contraction starts. As the
contractions become stronger simply
increase the intensity.

7.2. PROGRAMME B

You should stay in programme A as
long as possible, but when your
contractions intensify and become
more frequent you can progress to
programme B.
Do this by pressing the programme
button P. The LCD screen will display a
flashing B. To avoid discomfort with the
change in programme, the set intensity
will drop by half. This programme has
50 small steps of intensity, so you have
fine control of the
stimulation. Press and release the ▲
button until you reach a comfortable
intensity setting.
Programme B provides you with a
stimulation pattern which is set to block
the heightened pain which you may
suffer.
You will feel that the stimulation in the
higher set of pads CH1 (left channel)
which have been placed just below your
strength of