Installation Instructions - Wellis Umbra Aufbauanleitung

ACCESSORIES CHECKING
EN
LIST OF THE STANDARD ACCESSORIES:
Please double-check the accessory Iist hereinafter and contact our company or our
distributor for any unconformity
Remarks:
1 .Without affecting their performancing, accessories may be changed without
further notice;
2.Drawings for reference only, Product Size & shape refer to actual faucet.

Installation Instructions

Do not disassemble the man body, as t has been installed &
commissioned correctly & precisely before leaving the factory,
To avoid the faucet from' jamming,do flush the water pipe
before installation,
After Installation,make Sure every joint safely sealed & no
leaking,
Using condition: Working pressure at 0.05-1.0 MPa (including
cold & hot water pressure), with applicable water temperature
40°C 90°C;
Make sure to connect the hot/cold Inlet pipe correctly, if stand-
ing in front,hot water pipe connecting to the left & cold water
pipe connecting to the right
Code
1
2
3
4
5
6
7
Aerator
The operation of our shower
panels and faucets is
designed for the ideal water
pressure between 3.5-4.5 bar.
Do
Not
Disassemble
The Accessory List
Main body
O-ring
Rubber washer
Clamp
Fixing bolt
Nut
Inlet pipe
Flush
the pipe
Quality
1
1
1
1
1
1
2