Charging Station - KONUS tipitop robot S2 Bedienungsanleitung

EN
B: Keep pressing the code match button on the
Space Isolator; (Tip: the code match button is
F
inside the hole, you need to use auxiliary tools
when pressing the button)
C: Turn on the cleaner;
D: After the cleaner toots 2 or 3 times, the
operation of code match is successful.
Tips: if you do not hear the sound"di di", it means
that the operation of code match is wrong.
16

Charging Station

Display Screen
A
Charging Electrode
B
Setting Buttons
C
Signal Window
D
Charging Jack
E
Full Go
F
Clock
G
Timing
H
Week Status
I
Current Time
J
Time Scheduling
L
Full Go Status: Works after the battery is full charged
M
Charging Status
K
Time Status
N
Week Status: It only displays the current week when it
is in setting status.
Current Time: When it displays"
charging station is current time.
When it does not display"
week in the charging station will twinkle, which means it
is in setting status.
Charging Status: when the cleaner gets back to the
charging station, the icon "
Time Scheduling: when it displays" ", which means it
has been set time scheduling. when pressing the
button"−", the current time is turned into the time
scheduling. After 30s, it turns into current time.when it
does not display " ", it means no time scheduling.
Work after the battery is charged full: when it
displays " ", it means it has been set "Full Go" mode.
14
", the time in the
", the icon of time and
"is twinkling.
Usage Guidance of Charging Station
Full Go
Press this button, the icon "
station will twinkle. When the icon "
means the cleaner will work after being charged full.
When the icon " " disappears, which means this
function has been cancelled.
Clock
Press this button, the icon "
means you can set the current time. Press this button
again, the hour, minute, week in the screen will appear
by turns.
When one of " hour ", " minute", " week " appears, press
" + "or " − " to adjust the number and week. Finally,
press the button one more time to confirm the
current time until the icon"
the current time has been set.
Timing
Press the button " Timing " , the icon "
screen will be extinguished, it mean that the machine
enters the setting of time
Now, the hour of the icon "
"+ " or " − " to adjust the number up and down.
Press the button " Timing " for the second time, he
minute of the icon " " will twinkle, press "+"
or " − " to adjust the number up and down.
Press the button " Timing " for the third time, the week
of the icon"
press " + " or " − " to adjust the week by turns, if you
want to select all week or cancel the week, please press
the button "Full Go". Press the button " Timing " to
confirm after finishing the setting. It means that the
time scheduling is successful when there is the
icon " " ,if not, it means there is no time scheduling.
Tips: When the charging station is in no-set state, press
the button "—", the current time will turn into appoint-
ment time, after 30s, it changes into the current time.
Press the button"+", the number in the display screen is
fault code.
Usage:1. Install the charging station according to the
instillation method.
(Attention: Please ensure the back side of charging
station is against the wall. Otherwise, the cleaner may
push it, and the cleaner may not find it.)
2. Turn on the cleaner and press the button " charge ".
Then the cleaner will searching the charging station
automatically.
"in the charging
"appears, which
" will disappears. That
"appears, which means
" in the display
" will twinkle, press
" will twinkle,