Remote Control; Space Isolator; Charging Station; Product Usage - KONUS tipitop robot S2 Bedienungsanleitung

EN
7
Attention:
Danger! Electric shock!
A
EVA Plastic Strip
B
1. If the machine is not used for a long time, please
charge the battery fully, then take it out and put it in
shade place, keep the bottom of cleaner dry.
2. The battery should be charged about 12H, if the
machine is not used for a long time or the first time.
When the battery is used up for 3-4 times, which will
make the battery best efficient.
3. You should use the original battery, or else it will
cause damage and accident.
8

Remote Control

1. Unfold the battery cover.
A
2. Put two alkaline batteries (AAA) into the battery
B
jar, take care of the positive and negative poles.
3. Turn on the power switch after installing the
battery, and check whether the remote control can
C
control the cleaner. If not, please match code
again.
9

Space Isolator

1. Unfold the battery cover.
A
2. Put two alkaline batteries (AA)) into the battery
B
jar, take care of the positive and negative
terminal.
3. Turn on the power switch, the power indicator
C
will twinkle.
4. Put the space isolator on the flat floor and
D
behind the wall.
Tips: If the space isolator can not work, please match
code again.
12
10

Charging Station

1. Put the charging station on the flat floor and
A
behind the wall, no obstacle or hollow areas 3m
away from the charging station in the front and
0.5m on the right and left.
2. Insert the adaptor into the power socket , and
B
another side in the charging station.
3. Do not cover the signal window of the
C
charging station, or else the function of
auto-charging will be invalid.
Danger ！ Electric shock.
D
Tips: If the charging station can not work, please match
code again.

Product Usage

Work Mode
Turn on and Turn off the Machine
11
Turn on the machine:
A
1. Press the button" "in the machine about 3s，
then loose it, the machine will beep for 1 time,
the power indicator is on, and the machine is in
standby.
2. Press the button" "in the remote control that
is aimed at the infrared signal receiver to turn on
the machine.
Turn off the machine:
B
1. Press the button"
turn off the power.
2. The machine will be powered off automatically
after standbying for 2 minutes.
Tips: Please aim at the infrared signal receiver when
you turn on the machine with remote control.
12
Work Mode
Auto Cleaning
A
1. Turn on the power switch, the power indicator
will be on. Press the button "AUTO", the machine
will start cleaning automatically according to the
house environment. Then you press the button
"AUTO", it will stop.
" in the remote control to