Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
NOTE!
When installing nozzles and nozzle needles that have already been in
use, they must first be cleaned of all deposits and material residues.
Material residues in nozzles can result in leaks in the nozzle-needle
system, while nozzle needles with hardened material residues can cause
damage to the sealing elements in the jet valve.
Changing the sealing screw
1. Depressurise all connections and stop the supply of energy and material!
2. Remove the protective plastic sleeve (2).
3. Undo the lock (6) and unscrew it.
Important: the lock is under spring tension!
4. Remove the pressure spring (5) and pull the nozzle needle (4) out of the main
body (1).
5. Unscrew the sealing screw (3) from the main body (1) using a suitable flat-blade
screwdriver.
6. Screw in the new sealing screw (3), making sure that the sealing screw is lightly
greased with technical Vaseline (see chap. "Changing the sealing elements of
the sealing screw").
7. Reassemble the AXDV-P50 in the reverse order.
54
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
