ABNOX AXDV-P50 Montageanleitung Seite 47

NOTE!
The flow of material can be adjusted to suit individual requirements by
turning the regulating screw (see illustration above):
Turn screw to right:
Turn screw to left:
NOTE!
The illustrations in these instructions may differ slightly from the actual
version of the device. Incorrect handling can damage the nozzle and
nozzle needle. Only reduce the material flow (by turning the regulating
screw to the right) while the material is being dispensed. Once the
nozzle closes, do not turn the regulating screw any further to the right.
to reduce the material flow
to increase the material flow
EN
47