Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Table of contents
1.1
About this document..................................................................
2.1
Indoor unit .................................................................................
2.1.1
3.1
System layout............................................................................
3.2
Operation range ........................................................................
4.1
Preparing the installation site ....................................................
4.1.1
4.2
Preparing refrigerant piping.......................................................
4.2.1
Refrigerant piping requirements..................................
4.2.2
Refrigerant piping insulation .......................................
5.1
Opening the units ......................................................................
5.1.1
To open the indoor unit ...............................................
5.2
Installing the indoor unit ............................................................
5.2.1
To install the mounting plate .......................................
5.2.2
To drill a wall hole .......................................................
5.2.3
To remove the pipe port cover ....................................
5.2.4
To provide drainage ....................................................
5.3
Connecting the refrigerant piping ..............................................
5.3.1
5.3.2
5.4
Connecting the electrical wiring.................................................
5.4.1
5.5
Finishing the indoor unit installation ..........................................
5.5.1
interconnection cable ..................................................
5.5.2
To pass the pipes through the wall hole .....................
5.5.3
To fix the unit on the mounting plate...........................
6.1
To set a different address..........................................................
7.1
Checklist before commissioning................................................ 10
7.2
To perform a test run................................................................. 11
7.2.1
To perform a test run in winter season ....................... 11
9.1
Wiring diagram .......................................................................... 12
1
About the documentation
1.1
About this document
INFORMATION
Make sure that the user has the printed documentation and
ask him/her to keep it for future reference.
Target audience
Authorised installers
INFORMATION
This appliance is intended to be used by expert or trained
users in shops, in light industry, and on farms, or for
commercial and household use by lay persons.
ATXF25~35A5V1B
Daikin room air conditioner
3P519299-6D - 2019.02
Documentation set
This document is part of a documentation set. The complete set
consists of:
▪ General safety precautions:
3
▪ Safety instructions that you MUST read before installing
3
▪ Format: Paper (in the box of the indoor unit)
3
▪ Indoor unit installation manual:
3
3
▪ Installation instructions
3
▪ Format: Paper (in the box of the indoor unit)
3
▪ Installer reference guide:
3
▪ Preparation of the installation, good practices, reference data,...
4
▪ Format: Digital files on
4
and-manuals/product-information/
4
Latest revisions of the supplied documentation may be available on
4
the regional Daikin website or via your dealer.
4
4
The original documentation is written in English. All other languages
are translations.
4
Technical engineering data
4
4
▪ A subset of the latest technical data is available on the regional
5
Daikin website (publicly accessible).
5
▪ The full set of latest technical data is available on the Daikin
6
Business Portal (authentication required).
6
6
8
2
About the box
8
8
8
2.1
Indoor unit
8
9
INFORMATION
9
The following figures are just examples and may NOT
9
completely match your system layout.
9
▪ At delivery, the unit MUST be checked for damage. Any damage
9
MUST be reported immediately to the claims agent of the carrier.
9
▪ Bring the packed unit as close as possible to its final installation
position to prevent damage during transport.
10
▪ Unpack the indoor unit completely according to the instructions
mentioned on the unpacking instructions sheet.
2.1.1
To remove the accessories from the
11
indoor unit
12
3
About the unit
WARNING: FLAMMABLE MATERIAL
The refrigerant inside this unit is mildly flammable.
3.1
System layout
3.2
Operation range
Use the system in the following temperature and humidity ranges for
safe and effective operation.
Operation mode
(a)(b)
Cooling
Table of contents
http://www.daikineurope.com/support-
Operation range
▪ Outdoor temperature: -10~46°C DB
▪ Indoor temperature: 18~32°C DB
▪ Indoor humidity: ≤80%
Installation manual
3
Werbung
Kapitel
Inhaltsverzeichnis
