Removing And Inserting The Insert - Naturkind Lux Bedienungs- Und Pflegeanleitung

3.7 Removing and inserting the insert

24
VIDEO INSTRUCTION
VIDEO INSTRUCTION
The insert on the inside of the hard carrycot can be
removed as follows:
1. Open both plastic levers (8) that are located
at the roof hinges on the inside of the hard
carrycot.
2. Pull the plastic levers until you have completely
pulled the tubes that are attached to them out of
the guides in the frame of the hard carrycot and
out of the cloth guides that are incorporated in
the insert.
To reattach the insert, proceed as follows:
1. Place the insert in the hard carrycot so that the
washing label is at the foot of the hard carrycot.
2. Fasten the head end of the insert with the
shorter of the two tubes. First, insert the tube
into the cloth guide. Immediately afterwards,
press the tube including the cloth into the guide
on the frame of the hard carrycot.
3. Push the tube into the guide in the frame of the
hard carrycot until the attached plastic lever
reaches the height of its receiver. Push the
lever into the receiver.
4. Repeat the procedure on the other side of the
hard carrycot with the foot end of the insert and
the remaining tube that is the longer of both
tubes.