3.3 Removing the hard carrycot from the frame
3.4 Using the swing function
Warning! Only set this hard carrycot down on a dry, firm and even surface.
22
VIDEO INSTRUCTION
1. Activate the parking brake (see operating instruc-
tions of your stroller).
2. Press the light gray push button (5) on one side
of the mounting device.
3. Repeat this on the other side of the stroller.
4. Remove the hard carrycot.
If you set the hard carrycot on the ground, you can
use the swing function.
To activate this function, fold the four plastic
supports (6) of the hard carrycot as depicted for the
two lower ones.
To deactivate this function, unfold the four plastic
supports as depicted for the two upper ones.