Operation; Assembling And Folding The Hard Carrycot; Attaching The Hard Carrycot To The Frame - Naturkind Lux Bedienungs- Und Pflegeanleitung

3. Operation

3.1 Assembling and folding the hard carrycot

3.2 Attaching the hard carrycot to the frame

VIDEO INSTRUCTION
To assemble the hard carrycot, please proceed as
follows:
1. Remove the mattress from the folded hard
carrycot.
2. Two metal brackets will emerge. By pushing the
metal brackets outwards, the hard carrycot sets
itself up.
3. Push the metal brackets (1) outwards until the
hard carrycot has set itself up and the brackets
press against the anchors in the bottom part.
4. Put the mattress back into the hard carrycot.
In order to fold the hard carrycot, proceed in reverse
order.
1. Activate the parking brake (see operating
instructions of your stroller).
2. Lift up the hard carrycot and place the pivots
that are located on both sides of the hard carry-
cot in the provided receivers (4) on the frame.
3. Push the seating unit or the hard carrycot with
the pins into the receivers until the pins engage
in the receivers.
Warning! Before use, make sure that the
hard carrycot is properly engaged.
21