JBM 52233 Bedienungsanleitung Seite 8

printer.
PAPER REPLACEMENT:
A. Open the clear cover.
B. Insert replaced paper roll into the paper feeding for
auto running the paper into the printer.
C. Pull the paper slowly and straightly from the paper
roll in the chamber.
MAIN MENU:
You will view the following
SYSTEM
screens by pressing ◄ / ► to
ANALYZER
switch between all functions and
settings.
Press «ENTER» to do battery
BATTERY TEST
test.
XX.XX V
Press «ENTER» to do system
SYSTEM TEST
test.
XX.XX V
Press «ENTER» to do In-vehicle
IN-VEHICLE
test.
TEST
XX.XX V
Press «ENTER» to print last re-
PRINT LAST
sult.
RESULT
Press «ENTER» to change lan-
LANGUAGE
guage.
SELECT
Press «ENTER» to see how
TEST
many times you tested in battery
COUNTER
/ system / in-vehicle test.
Press «ENTER» to start Date
2018/02/05
& Time Setting. Then press ◄ /
► to adjust "Year". Press «EN-
13:25:00
TER» to finish Year. Please fo-
llow previous step to finish Mon-
th, Day, Hour & Minute.
Press «ENTER» to start adjus-
BRIGHTNESS
ting brightness of the screen.
Press «ENTER» to edit customi-
CUSTOMIZE
zed info.
BATTERY TEST:
1. Select BATTERY TEST.
BATTERY
TEST
XX.XX V
2. Press the ◄ ► to select
REGULAR/STD
START/STOP
Press «ENTER».
REGULAR/STD or START/
STOP battery.
* REGULAR/STD BATTERY:
FLOODED, AGM FLAT PLATE, AGM SPIRAL, VRLA/
GEL
* START/STOP BATTERY:
AGM FLAT PLATE, EFB
BATTERY
TYPE:
AGM FLAT
PLATE
4. Press «ENTER» to confirm choice.
SELECT
RATING:
CCA/SAE
6. Press «ENTER» to confirm choice.
SELECT CAPA-
CITY:
560CCA/SAE
ABOVE
32°F/0°C?
YES/NO
9. Press <<Enter>> to begin the test.
*Return Feature: Before the test is started, the
user can always return to the previous setting
page by pressing <<ENTER>> for 2 seconds.
SURFACE CHARGE NOTICE:
The battery will hold a surface charge if the engine has
been running or after the battery has been charged.
The tester may prompt you to remove the surface char-
ge.
A. Follow the instructions indicating when to turn the
headlights on and off or apply a load into the ba-
ttery.
IN VEHICLE:
SURFACE CHAR-
GE IN VEHICLE?
YES
· 8 ·
3. Press the ◄ ► key to select
the battery type:
5. Press the ◄ ► key to select
the battery rating: CCA/SAE,
EN, JIS, DIN, IEC, & CA/
MCA.
7. Press the ◄ ► key to input
the battery capacity.
CCA/SAE: 40~2000
EN: 40~1885
DIN: 25~1120
IEC: 30~1320
JIS: By Battery Type No.
CA/MCA: 50~2400
8. Press the ◄ ► key to con-
firm temperature.
TURN HEADLI-
GHTS ON FOR 15
SECS