Direct Controls - NEC LCD200 Bedienungsanleitung

Controls
Controls

Direct Controls

EXIT: Has no function
SETTING / : Selects between two sets of parameters for each
resolution. Each selection can be preset by adjusting the OSM controls
to your preference. Changes are saved automatically.
LCD Brightness -/+: Adjusts the overall image and background screen
brightness.
PROCEED: Accesses OSM controls menu
RESET: Has no function
LED Power Indicator Light: Located on the lower right and indicates
the monitor's power mode. Each mode reduces the amount of power
used by the monitor.
Mode
ON
Standby & Suspend
Power Switch OFF
Power Switch: Located on the right side of the monitor's base which
turns the monitor power on or off. When the power is on, the LED is lit.
SYNC Switch: Located on the rear of the monitor, which allows
selection between standard separate and composite Sync modes (ON)
and Sync on Green priority mode (OFF).
LED Indicator
Green
Amber
No Light
Power Consumption
Typical: 33 watts
Typical: About 6 watts
No Power Used
E - 11